Industry News

Industry News

Home / News / Industry News / Mylar is a brand name for a specific type of plastic film

Mylar is a brand name for a specific type of plastic film


Mylar is a brand name for a specific type of plastic fi […]

Mylar is a brand name for a specific type of plastic film. It is a biaxially-oriented polyethylene terephthalate (BoPET) with many advantages, including high tensile strength, chemical and dimensional stability, transparency, reflectivity, gas and aroma barrier properties and electrical insulation. It is commonly used in packaging, medical applications and as a decoration for instruments. It is also a popular material for building insulation, insulating structures, and kites.

The material is sometimes confused with aluminum foil, but it is not the same thing. Foil is made of a thick metal, while Mylar is a clear plastic. Both have their own uses, but they are not interchangeable. Foil can be used to make a reflective surface or cover items to protect them from dust and other particles, but it is not as flexible or as strong as Mylar.

Aluminium Mylar Tape (AL+PET+AL) is a good insulation material for Cable and Wire. It has the advantage of good conductivity and electromagnetic insulation, so it is mainly used in electrical communication cables. It can also be used in the ventilation industry for flexible Air Duct pipe products.

Mylar is a special kind of PET film, but it can also be coated with an aluminum foil layer to improve its performance. This combines the reflective and protective qualities of aluminum foil with the transparency and strength of polyester film. The result is an incredibly tough and durable sheet that can be used in a variety of applications.

The shiny side of Mylar reflects up to 99 percent of light, making it ideal for insulating structures. It is less permeable to gases than aluminum foil, so it can be used in a wide range of applications. It is also a good choice for covering items like instruments, telescopes, and mirrors to prevent dust accumulation.

Aside from the ability to withstand intense heat, mylar is also an excellent thermal insulator. It blocks out a lot of radiant heat and can even absorb some of it. However, it is important to note that mylar can trap slightly warmed air as well. For this reason, it is best to keep it out of direct contact with a bare surface so the absorbed heat can dissipate.

Mylar can be laser cut to create custom stencils and other decorative items. The thickness of the mylar will determine the power of the laser needed to cut it, but most available Mylar is well within the capabilities of standard laser cutters. To make sure that the mylar doesn't shift during laser cutting, it is important to secure it to a work surface with tape or glue.

To prepare the mylar for laser cutting, it is necessary to roughen both surfaces with sandpaper. Afterward, the surface and mylar should be cleaned to remove any residues. Once the mylar is clean and dry, it should be secured to a backer board with tape or adhesive. This will prevent the mylar from shifting during laser cutting and allow for a clean, crisp cut.


Go Back

Recommended product

25AL/12PET for UK’s adhesive tape market
aluminium foil pet film coated for packing material
0.021mm single side aluminum PET mylar film Material for Flexible air ducts
flexible ducts tape PET metallized polyester film
Contact Us