Cable insulation materials have several characteristics […]
Cable insulation materials have several characteristics that make them suitable for use in electrical wiring and cable assemblies. These include:
Place of Origin:Zhejiang, China
Material:AL & PET& PVC
Product name:hot melting aluminum pet mylar tape
Exhibition:Home and abroad
Product Laminating Line:Over 4 lines
District:Lin'an ,Hangzhou ,China
Originate time of factory:Year at 1992
Yearly output:Over 5000 Tons
Product Cutting Line:Over 4 lines
1.High electrical insulation resistance: This is the ability of the material to resist the flow of electrical current, and is measured in ohms per meter.
2.High dielectric strength: This is the maximum voltage that can be applied to the insulation without causing it to break down and conduct electricity.
3.Low moisture absorption: This is the ability of the insulation to resist the absorption of moisture, which can degrade its electrical properties and lead to failure over time.
4.Low thermal conductivity: This is the ability of the insulation to resist the transfer of heat, which helps to prevent overheating and damage to the cable.
5.Good mechanical properties: This includes flexibility, abrasion resistance, and resistance to impact and crushing.
6.Chemical resistance : This includes resistance to oils, acids, and other chemicals that the cable may come into contact with in its environment.
7.Flame retardant : Cable insulation should have flame retardant properties to prevent the spread of fire in case of an accident.
8.UV resistance : Cable insulation should be resistant to UV radiation as it can cause damage to the insulation over time.
Some examples of cable insulation materials include PVC, rubber, polyethylene, polypropylene, and Teflon.